General Purpose Retaining Compound
53050 50ml

Vibra-TITE 53050 High Strength Retaining Compound is a single part, low viscosity, fast curing anaerobic resin used for bonding rigid assemblies of all types. This material can be used effectively to increase the strength of most mechanical assemblies. Typical Applications Vibra-TITE 530 can be used in a broad variety of applications such as what is listed below. This lower viscosity product is recommended for interference or press fit parts where large gap filling is not required.

Compare to Loctite 60931

1 50ml Bottle

Locks keys & splines
Locks bearings in place preventing spin-out
Bonds rotor to shaft in low horsepower motors
Augments press fits
Locks bushings & sleeves in housings & on shafts
Restores the fit to worn assemblies or out-of tolerance parts

Technical Features Resin:..................................Dimethylacrylate
Color:....................................Green
Fixture Speed w/Primer……<5 minutes
Fixture Speed w/out Primer..10-20 min. @77°F
Viscosity……………….............125 cp
Gap Fill......................................0.005”
Shelf Life.........................12 months @ 68°F
Max. Operating Temp….-65°F to +300°F


Cured Performance
Full Cure Time.................24 hours @ 68°F
Shear Strength…………………>2000 psi


Vibra-TITE 530 is a low viscosity rapid curing liquid which augments press fit and slip fit applications. Product conforms to MIL-R-46082, ASTM D-5363, GM-1183024.

MSDS

Made In Michigan