Flexible Gasket Maker - Solvent Resistant
50 ml Tube

Vibra-TITE 73050 Gasket Maker is a single component, medium strength, thixotropic, anaerobic sealant which cures when confined between close fitting metal surfaces. 730 Gasket Maker provides an instant low pressure seal.

1 50ml Tube
The product image shown may not represent actual product

730 Gasket Maker seals joints between rigid metal faces and flanges such as valve covers and gearbox casings. This product can be used with or without pre-cut, pre-formed gaskets.

Technical Features
Resin:...............Modified Urethane Acrylate
Color:....................................Red
Fixture Speed w/Activator……<15 minutes
Fixture Speed w/out Activator……….1 hour
Viscosity(Thixotropic).800000/3750000 cps
GapFill............................................... .125"
Shelf Life.........................12 months @ 68°
Max. Operating Temp…….-65°F to +300°F

Cured Performance
Full Cure Time.................24 hours @ 68°F
Shear Strength……………..900-1500 psi


Where gap size is large or where the surface is uneven, apply a Vibra-TITE primer to help cure the product through volume. Gasket Maker can be roller coated, screen printed or applied by pads. Product conforms to GM-1182863

Made In Michigan

MSDS